MediaWiki-API-Hilfe

Auszuführende Aktion.

Format der Ausgabe.

maxlag kann verwendet werden, wenn MediaWiki auf einem datenbankreplizierten Cluster installiert ist. Um weitere Replikationsrückstände zu verhindern, lässt dieser Parameter den Client warten, bis der Replikationsrückstand kleiner als der angegebene Wert (in Sekunden) ist. Bei einem größerem Rückstand wird der Fehlercode maxlag zurückgegeben mit einer Nachricht wie Waiting for $host: $lag seconds lagged.
Siehe Handbuch: Maxlag parameter für weitere Informationen.

Den s-maxage-Header auf diese Anzahl Sekunden festlegen. Fehler werden niemals gecacht.

Den max-age-Header auf diese Anzahl Sekunden festlegen. Fehler werden niemals gecacht.

Sicherstellen, dass der Benutzer eingeloggt ist, wenn auf user gesetzt, oder Bot ist, wenn auf bot gesetzt.

Der angegebene Wert wird mit in die Antwort aufgenommen und kann zur Unterscheidung von Anfragen verwendet werden.

Namen des bearbeitenden Hosts mit zurückgeben.

Aktuellen Zeitstempel mit zurückgeben.

Beim Zugriff auf die API mittels Cross-Domain-AJAX-Anfrage (CORS) ist dieser Parameter auf die veranlassende Domain zu setzen. Er muss in jedem Pre-Flight-Request angegeben werden und deshalb ein Teil der Anfrage-URI sein (nicht des POST-Bodys). Er muss genau einer der Angaben im Origin-Header entsprechen, d. h. er muss auf etwas wie https://de.wikipedia.org oder https://meta.wikimedia.org gesetzt werden. Falls dieser Parameter nicht mit dem Origin-Header übereinstimmt, wird eine 403-Antwort zurückgegeben. Falls dieser Parameter dem Origin-Header entspricht und die Domain auf der Whitelist ist, wird ein Access-Control-Allow-Origin-Header gesetzt.

Zu verwendende Sprache für Nachrichtenübersetzungen. Eine Liste der Codes kann von action=query&meta=siteinfo mit siprop=languages abgerufen werden. Gib user zum Verwenden der aktuellen Benutzerspracheinstellung oder content an, um die Inhaltssprache des Wikis zu verwenden.

Benutzername, IP-Adresse oder IP-Bereich, der gesperrt werden soll.

Sperrdauer. Kann relativ (z. B. 5 months oder 2 weeks) oder absolut (z. B. 2014-09-18T12:34:56Z) sein. Wenn auf infinite, indefinite oder never gesetzt, ist die Sperre unbegrenzt.

Sperrbegründung.

Nur anonyme Benutzer sperren (z. B. anonyme Bearbeitungen für diese IP deaktivieren).

Benutzerkontenerstellung verhindern.

Die zuletzt verwendete IP-Adresse automatisch sperren und alle darauffolgenden IP-Adressen, die versuchen sich anzumelden.

Benutzer davon abhalten, E-Mails auf dem Wiki zu versenden (erfordert das blockemail-Recht).

Den Benutzernamen im Sperr-Logbuch verstecken (erfordert das hideuser-Recht).

Dem Benutzer erlauben, seine eigene Diskussionsseite zu bearbeiten (abhängig von $wgBlockAllowsUTEdit).

Falls der Benutzer bereits gesperrt ist, die vorhandene Sperre überschreiben.

Benutzer- und Diskussionsseiten des Benutzers oder der IP-Adresse beobachten.

Ein „csrf“-Token abgerufen von action=query&meta=tokens

Typ des Tokens, das getestet werden soll.

Token, das getestet werden soll.

Maximal erlaubtes Alter des Tokens in Sekunden.

Erster zu vergleichender Titel.

Erste zu vergleichende Seitennummer.

Erste zu vergleichende Version.

Zweiter zu vergleichender Titel.

Zweite zu vergleichende Seitennummer.

Zweite zu vergleichende Version.

Benutzername.

Passwort (wird ignoriert, wenn mailpassword angegeben ist).

Domain für die externe Authentifizierung (optional).

Der in der ersten Anfrage erhaltene Benutzerkontenerstellungs-Token.

E-Mail-Adresse des Benutzers (optional).

Realname des Benutzers (optional).

Wenn ein Wert angegeben wird, wird ein zufälliges Passwort per E-Mail an den Benutzer versandt.

Optionale Begründung für die Benutzerkontenerstellung, die in den Logbüchern vermerkt wird.

Festzulegender standardmäßiger Sprachcode für den Benutzer (optional, Standard ist Inhaltssprache).

Titel der Seite, die gelöscht werden soll. Kann nicht zusammen mit pageid verwendet werden.

Seitennummer der Seite, die gelöscht werden soll. Kann nicht zusammen mit title verwendet werden.

Löschbegründung. Falls nicht festgelegt, wird eine automatisch generierte Begründung verwendet.

Seite auf die Beobachtungsliste des aktuellen Benutzers setzen.

Seite zur Beobachtungsliste des aktuellen Benutzers hinzufügen oder von ihr entfernen, die Standardeinstellungen verwenden oder die Beobachtung nicht ändern.

Seite von der Beobachtungsliste entfernen.

Name des alten zu löschenden Bildes, wie von action=query&prop=imageinfo&iiprop=archivename angegeben.

Ein „csrf“-Token abgerufen von action=query&meta=tokens

Titel der Seite, die bearbeitet werden soll. Kann nicht zusammen mit pageid verwendet werden.

Seitennummer der Seite, die bearbeitet werden soll. Kann nicht zusammen mit title verwendet werden.

Abschnittsnummer. 0 für die Einleitung, new für einen neuen Abschnitt.

Die Überschrift für einen neuen Abschnitt.

Seiteninhalt.

Bearbeitungszusammenfassung. Auch Abschnittsüberschrift, wenn section=new und sectiontitle nicht festgelegt ist.

Change tags to apply to the revision.

Kleine Bearbeitung.

Nicht-kleine Bearbeitung.

Diese Bearbeitung als Bot-Bearbeitung markieren.

Zeitstempel der Basisversion, wird verwendet zum Aufspüren von Bearbeitungskonflikten. Kann abgerufen werden durch action=query&prop=revisions&rvprop=timestamp.

Zeitstempel, an dem der Bearbeitungsprozess begonnen wurde. Er wird zum Aufspüren von Bearbeitungskonflikten verwendet. Ein geeigneter Wert kann mithilfe von curtimestamp beim Beginn des Bearbeitungsprozesses (z. B. beim Laden des Seiteninhalts zum Bearbeiten) abgerufen werden.

Keinen Fehler zurückgeben, wenn die Seite in der Zwischenzeit gelöscht wurde.

Seite nicht bearbeiten, falls sie bereits vorhanden ist.

Einen Fehler zurückgeben, falls die Seite nicht vorhanden ist.

Seite der Beobachtungsliste hinzufügen.

Seite von der Beobachtungsliste entfernen.

Die Seite zur Beobachtungsliste des aktuellen Benutzers hinzufügen oder von ihr entfernen, die Standardeinstellungen verwenden oder die Beobachtung nicht ändern.

Der MD5-Hash des Parameters text oder der aneinandergehängten Parameter prependtext und appendtext. Wenn angegeben, wird die Bearbeitung nicht ausgeführt, wenn der Hash nicht korrekt ist.

Diesen Text an den Anfang der Seite setzen. Überschreibt text.

Diesen Text an das Ende der Seite hinzufügen. Überschreibt text.

Verwende statt dieses Parameters section=new zum Anhängen eines neuen Abschnitts.

Diese Version rückgängig machen. Überschreibt text, prependtext und appendtext.

Alle Versionen von undo bis zu dieser rückgängig machen. Falls nicht angegeben, nur eine Version rückgängig machen.

Weiterleitungen automatisch auflösen.

Für den Eingabetext verwendetes Inhaltsserialisierungsformat.

Inhaltsmodell des neuen Inhalts.

Ein „csrf“-Token abgerufen von action=query&meta=tokens

Der Token sollte immer als letzter Parameter gesendet werden, zumindest aber nach dem text-Parameter.

Benutzer, an den die E-Mail gesendet werden soll.

Betreffzeile.

E-Mail-Inhalt.

Eine Kopie dieser E-Mail an mich senden.

Ein „csrf“-Token abgerufen von action=query&meta=tokens

Titel der Seite.

Zu konvertierender Wikitext.

Versionsnummer, die für die Anzeige von {{REVISIONID}} und ähnlichen Variablen verwendet wird.

Which pieces of information to get:

wikitext

The expanded wikitext.

categories

Any categories present in the input that are not represented in the wikitext output.

properties

Page properties defined by expanded magic words in the wikitext.

volatile

Whether the output is volatile and should not be reused elsewhere within the page.

ttl

The maximum time after which caches of the result should be invalidated.

parsetree

The XML parse tree of the input.

Note that if no values are selected, the result will contain the wikitext, but the output will be in a deprecated format.

Ob HTML-Kommentare in der Ausgabe eingeschlossen werden sollen.

XML-Parserbaum erzeugen (ersetzt durch prop=parsetree).

Das Format des Feeds.

Von welchen Benutzern die Beiträge abgerufen werden sollen.

Auf welchen Namensraum die Beiträge begrenzt werden sollen.

Von Jahr (und früher).

Von Monat (und früher).

Beiträge filtern, die diese Markierungen haben.

Nur gelöschte Beiträge anzeigen.

Nur aktuelle Versionen anzeigen.

Nur Seitenerstellungen anzeigen.

Zeigt den Größenunterschied zwischen Versionen an.

Das Format des Feeds.

Namensraum, auf den die Ergebnisse beschränkt werden sollen.

Alle Namensräume außer dem ausgewählten.

Verbundenen Namensraum (Diskussions oder Hauptnamensraum) mit einschließen.

Tage, auf die die Ergebnisse beschränkt werden sollen.

Maximale Anzahl zurückzugebender Ergebnisse.

Änderungen seit jetzt anzeigen.

Kleine Änderungen ausblenden.

Änderungen von Bots ausblenden.

Änderungen von anonymen Benutzern ausblenden.

Änderungen von registrierten Benutzern ausblenden.

Kontrollierte Änderungen ausblenden.

Änderungen des aktuellen Benutzers ausblenden.

Nach Markierung filtern.

Nur Änderungen an Seiten anzeigen, die von dieser Seite verlinkt sind.

Zeige Änderungen an Seiten die von der ausgewählten Seite verlinkt sind.

Das Format des Feeds.

Seiten auflisten, die innerhalb dieser Anzahl Stunden ab jetzt geändert wurden.

Verlinke direkt zum veränderten Abschnitt, wenn möglich.

Include multiple revisions of the same page within given timeframe.

Used along with token to access a different user's watchlist.

A security token (available in the user's preferences) to allow access to another user's watchlist.

Show only items that meet these criteria. For example, to see only minor edits done by logged-in users, set show=minor|!anon.

Which types of changes to show:

edit

Regular page edits.

external

External changes.

new

Page creations.

log

Log entries.

Don't list changes by this user.

Ziel-Datei, ohne das Datei:-Präfix.

Hochladekommentar.

Archivname der Version, auf die die Datei zurückgesetzt werden soll.

Ein „csrf“-Token abgerufen von action=query&meta=tokens

Module, zu denen eine Hilfe angezeigt werden soll (Werte der Parameter action und format oder main). Kann Submodule mit einem + angeben.

Hilfe für Submodule des benannten Moduls einschließen.

Hilfe für Submodule rekursiv einschließen.

Die Ausgabe in eine Standard-API-Antwort-Struktur einschließen.

Ein Inhaltsverzeichnis in der HTML-Ausgabe einschließen.

Anzahl der Grad, um die das Bild im Uhrzeigersinn gedreht werden soll.

When more results are available, use this to continue.

Eine Liste der Titel, an denen gearbeitet werden soll.

Eine Liste der Seitenkennungen, an denen gearbeitet werden soll.

Eine Liste der Versionskennungen, an denen gearbeitet werden soll.

Get the list of pages to work on by executing the specified query module.

Note: Generator parameter names must be prefixed with a "g", see examples.

Automatically resolve redirects in titles, pageids, and revids, and in pages returned by generator.

Convert titles to other variants if necessary. Only works if the wiki's content language supports variant conversion. Languages that support variant conversion include gan, iu, kk, ku, shi, sr, tg, uz, zh.

Ein „csrf“-Token abgerufen von action=query&meta=tokens

Import-Zusammenfassung.

Hochgeladene XML-Datei.

Für Interwiki-Importe: Wiki, von dem importiert werden soll.

Für Interwiki-Importe: zu importierende Seite.

Für Interwiki-Importe: importiere die komplette Versionsgeschichte, nicht nur die aktuelle Version.

Für Interwiki-Importe: importiere auch alle eingebundenen Vorlagen.

Für Interwiki-Importe: importiere in diesen Namensraum.

Als Unterseite dieser Seite importieren.

Ein „csrf“-Token abgerufen von action=query&meta=tokens

Benutzername.

Passwort.

Domain (optional).

Anmeldetoken, den du in der ersten Anfrage erhalten hast.

Which operation to perform:

create

Create a new change tag for manual use.

delete

Remove a change tag from the database, including removing the tag from all revisions, recent change entries and log entries on which it is used.

activate

Activate a change tag, allowing users to apply it manually.

deactivate

Deactivate a change tag, preventing users from applying it manually.

Tag to create, delete, activate or deactivate. For tag creation, the tag must not exist. For tag deletion, the tag must exist. For tag activation, the tag must exist and not be in use by an extension. For tag deactivation, the tag must be currently active and manually defined.

optionale Begründung für das Erstellen, Löschen, Aktivieren oder Deaktivieren der Markierung.

Warnungen während des Vorgangs ignorieren.

Ein „csrf“-Token abgerufen von action=query&meta=tokens

Titel der zu verschiebenden Seite. Kann nicht zusammen mit fromid verwendet werden.

Seitenkennung der zu verschiebenden Seite. Kann nicht zusammen mit from verwendet werden.

Titel, zu dem die Seite umbenannt werden soll.

Grund für die Umbenennung.

Verschiebt die Diskussionsseite, falls vorhanden.

Unterseiten verschieben, falls möglich.

Keine Weiterleitung erstellen.

Die Seite und die entstandene Weiterleitung zur Beobachtungsliste hinzufügen.

Die Seite und die entstandene Weiterleitung von der Beobachtungsliste entfernen.

Die Seite in jedem Fall zur Beobachtungsliste hinzufügen oder davon entfernen, die Voreinstellungen dafür nutzen oder den Beobachtungsstatus nicht ändern.

Alle Warnungen ignorieren.

Ein „csrf“-Token abgerufen von action=query&meta=tokens

Such-Zeichenfolge.

Maximale Anzahl zurückzugebender Ergebnisse.

Zu durchsuchende Namensräume.

Nichts unternehmen, falls $wgEnableOpenSearchSuggest falsch ist.

How to handle redirects:

return

Return the redirect itself.

resolve

Return the target page. May return fewer than limit results.

For historical reasons, the default is "return" for format=json and "resolve" for other formats.

Das Format der Ausgabe.

If warnings are raised with format=json, return an API error instead of ignoring them.

Setzt die Einstellungen auf Websitestandards zurück.

List of types of options to reset when the reset option is set.

List of changes, formatted name=value (e.g. skin=vector). Value cannot contain pipe characters. If no value is given (not even an equals sign), e.g., optionname|otheroption|..., the option will be reset to its default value.

A name of a option which should be set to the value given by optionvalue.

A value of the option specified by optionname, can contain pipe characters.

Ein „csrf“-Token abgerufen von action=query&meta=tokens

List of module names (values of the action and format parameters, or main). Can specify submodules with a +.

Format der Hilfe-Zeichenfolgen.

List of query module names (value of prop, meta or list parameter). Use modules=query+foo instead of querymodules=foo.

Get information about the main (top-level) module as well. Use modules=main instead.

Get information about the pageset module (providing titles= and friends) as well.

List of format module names (value of format parameter). Use modules instead.

Title of page the text belongs to. If omitted, contentmodel must be specified, and API will be used as the title.

Text to parse. Use title or contentmodel to control the content model.

Zu parsende Zusammenfassung.

Parse the content of this page. Cannot be used together with text and title.

Parse the content of this page. Overrides page.

If page or pageid is set to a redirect, resolve it.

Parse the content of this revision. Overrides page and pageid.

Which pieces of information to get:

text

Gives the parsed text of the wikitext.

langlinks

Gives the language links in the parsed wikitext.

categories

Gives the categories in the parsed wikitext.

categorieshtml

Gives the HTML version of the categories.

links

Gives the internal links in the parsed wikitext.

templates

Gives the templates in the parsed wikitext.

images

Gives the images in the parsed wikitext.

externallinks

Gives the external links in the parsed wikitext.

sections

Gives the sections in the parsed wikitext.

revid

Adds the revision ID of the parsed page.

displaytitle

Adds the title of the parsed wikitext.

headitems

Gives items to put in the <head> of the page.

headhtml

Gives parsed <head> of the page.

modules

Gives the ResourceLoader modules used on the page.

indicators

Gives the HTML of page status indicators used on the page.

iwlinks

Gives interwiki links in the parsed wikitext.

wikitext

Gives the original wikitext that was parsed.

properties

Gives various properties defined in the parsed wikitext.

limitreportdata

Gives the limit report in a structured way. Gives no data, when disablepp is set.

limitreporthtml

Gives the HTML version of the limit report. Gives no data, when disablepp is set.

Do a pre-save transform on the input before parsing it. Only valid when used with text.

Do a pre-save transform (PST) on the input, but don't parse it. Returns the same wikitext, after a PST has been applied. Only valid when used with text.

Includes language links supplied by extensions (for use with prop=langlinks).

Gibt nur den Inhalt dieses Abschnittes zurück oder erstellt einen neuen Abschnitt, wenn new angegeben wird.

new wird nur ausgewertet, wenn auch text angegeben wurde.

Überschrift des neuen Abschnittes, wenn section = new ist.

Anders als beim Bearbeiten der Seite wird der Parameter nicht durch die summary ersetzt, wenn er weggelassen oder leer ist.

Disable the PP Report from the parser output.

Deaktiviert Abschnittsbearbeitungslinks in der Parserausgabe.

Generate XML parse tree (requires content model wikitext).

Im Vorschaumodus parsen.

Parse in section preview mode (enables preview mode too).

Inhaltsverzeichnis in der Ausgabe deaktivieren.

Content serialization format used for the input text. Only valid when used with text.

Content model of the input text. If omitted, title must be specified, and default will be the model of the specified title. Only valid when used with text.

Letzte-Änderungen-Kennung, die kontrolliert werden soll.

Versionskennung, die kontrolliert werden soll.

Ein „patrol“-Token abgerufen von action=query&meta=tokens

Titel der Seite, die du (ent-)sperren möchtest. Kann nicht zusammen mit pageid verwendet werden.

Seitenkennung der Seite, die du (ent-)sperren möchtest. Kann nicht zusammen mit title verwendet werden.

Liste der Schutzebenen nach dem Format Aktion=Ebene (z.B. edit=sysop).

HINWEIS: Wenn eine Aktion nicht angegeben wird, wird deren Schutz entfernt.

Zeitstempel des Schutzablaufs. Wenn nur ein Zeitstempel übergeben wird, ist dieser für alle Seitenschutze gültig. Um eine unendliche Schutzdauer festzulegen, kannst du die Werte infinite, indefinite, infinity oder never übergeben.

Grund für den Seitenschutz oder dessen Aufhebung.

Aktiviert den Kaskadenschutz (alle eingebundenen Seiten werden ebenfalls geschützt). Wenn die übergebenen Schutzebenen keinen Kaskadenschutz unterstützen, wird dieser Parameter ignoriert.

Wenn vorhanden, fügt dieser Parameter die zu (ent-)sperrende Seite der Beobachtungsliste des aktuellen Benutzers hinzu.

Die Seite bedingungslos zur Beobachtungsliste des aktuellen Benutzers hinzufügen oder von ihr entfernen, Einstellungen verwenden oder Beobachtung nicht ändern.

Ein „csrf“-Token abgerufen von action=query&meta=tokens

Aktualisiert die Linktabellen.

Aktualisiert die Linktabelle der Seite und alle Linktabellen der Seiten, die sie als Vorlage einbinden.

When more results are available, use this to continue.

Eine Liste der Titel, an denen gearbeitet werden soll.

Eine Liste der Seitenkennungen, an denen gearbeitet werden soll.

Eine Liste der Versionskennungen, an denen gearbeitet werden soll.

Get the list of pages to work on by executing the specified query module.

Note: Generator parameter names must be prefixed with a "g", see examples.

Automatically resolve redirects in titles, pageids, and revids, and in pages returned by generator.

Convert titles to other variants if necessary. Only works if the wiki's content language supports variant conversion. Languages that support variant conversion include gan, iu, kk, ku, shi, sr, tg, uz, zh.

Zurückzuliefernde Eigenschaften der abgefragten Seiten.

Welche Listen abgerufen werden sollen.

Zurückzugebende Metadaten.

Schließt einen zusätzlichen pageids-Abschnitt mit allen zurückgegebenen Seitenkennungen ein.

Exportiert die aktuellen Versionen der angegebenen oder generierten Seiten.

Gibt den XML-Export zurück, ohne ihn in ein XML-Ergebnis einzuschließen (gleiches Format wie durch Special:Export). Kann nur zusammen mit export genutzt werden.

Gibt an, ob die komplette URL zurückgegeben werden soll, wenn der Titel ein Interwikilink ist.

Falls angegeben, wird query-continue als Schlüssel-Wert-Paar zurückgegeben, das anschließend an die Folgeabfrage gehängt werden kann. Dieser Parameter muss in der ersten Abfrage auf leer gesetzt werden.

Dieser Parameter ist für alle Neuentwicklungen empfohlen und wird in der nächsten API-Version Standard.

Momentan unbeachtet. In Zukunft wird continue Standard, dieser Parameter wird dann benötigt, um die rohen query-continue-Daten zu erhalten.

Eine Liste der Titel, an denen gearbeitet werden soll.

Eine Liste der Seitenkennungen, an denen gearbeitet werden soll.

Eine Liste der Versionskennungen, an denen gearbeitet werden soll.

Get the list of pages to work on by executing the specified query module.

Note: Generator parameter names must be prefixed with a "g", see examples.

Automatically resolve redirects in titles, pageids, and revids, and in pages returned by generator.

Convert titles to other variants if necessary. Only works if the wiki's content language supports variant conversion. Languages that support variant conversion include gan, iu, kk, ku, shi, sr, tg, uz, zh.

Which additional properties to get for each category:

sortkey

Adds the sortkey (hexadecimal string) and sortkey prefix (human-readable part) for the category.

timestamp

Adds timestamp of when the category was added.

hidden

Tags categories that are hidden with __HIDDENCAT__.

Which kind of categories to show.

How many categories to return.

When more results are available, use this to continue.

Only list these categories. Useful for checking whether a certain page is in a certain category.

The direction in which to list.

When more results are available, use this to continue.

Only include users in the given groups. Does not include implicit or auto-promoted groups like *, user, or autoconfirmed.

Exclude users in the given groups. Does not include implicit or auto-promoted groups like *, user, or autoconfirmed.

Only include users having the given rights. Does not include rights granted by implicit or auto-promoted groups like *, user, or autoconfirmed.

Exclude users having the given rights. Does not include rights granted by implicit or auto-promoted groups like *, user, or autoconfirmed.

Wie viele Spender zurückgegeben werden sollen.

When more results are available, use this to continue.

Which properties to get for each revision:

ids

The ID of the revision.

flags

Revision flags (minor).

timestamp

The timestamp of the revision.

user

User that made the revision.

userid

User ID of the revision creator.

size

Length (bytes) of the revision.

sha1

SHA-1 (base 16) of the revision.

contentmodel

Content model ID of the revision.

comment

Comment by the user for the revision.

parsedcomment

Parsed comment by the user for the revision.

content

Text of the revision.

tags

Tags for the revision.

Limit how many revisions will be returned.

Expand templates in revision content (requires drvprop=content).

Generate XML parse tree for revision content (requires drvprop=content).

Parse revision content (requires drvprop=content). For performance reasons, if this option is used, drvlimit is enforced to 1.

Only retrieve the content of this section number.

Revision ID to diff each revision to. Use prev, next and cur for the previous, next and current revision respectively.

Text to diff each revision to. Only diffs a limited number of revisions. Overrides drvdiffto. If drvsection is set, only that section will be diffed against this text

Serialization format used for drvdifftotext and expected for output of content.

The timestamp to start enumerating from. Ignored when processing a list of revision IDs.

The timestamp to stop enumerating at. Ignored when processing a list of revision IDs.

In which direction to enumerate:

newer

List oldest first. Note: drvstart has to be before drvend.

older

List newest first (default). Note: drvstart has to be later than drvend.

Only list revisions tagged with this tag.

Nur Versionen von diesem Benutzer auflisten.

Don't list revisions by this user.

When more results are available, use this to continue.

How many duplicate files to return.

When more results are available, use this to continue.

The direction in which to list.

Sucht nur nach Dateien im lokalen Repositorium.

Wie viele Links zurückgegeben werden sollen.

When more results are available, use this to continue.

Protocol of the URL. If empty and elquery is set, the protocol is http. Leave both this and elquery empty to list all external links.

Search string without protocol. Useful for checking whether a certain page contains a certain external url.

Expand protocol-relative URLs with the canonical protocol.

Which properties to get:

pageid

Page ID of each page.

title

Title of each page.

redirect

Flag if the page is a redirect.

Only include pages in these namespaces.

Show only items that meet these criteria:

redirect

Only show redirects.

!redirect

Only show non-redirects.

How many to return.

When more results are available, use this to continue.

Which file information to get:

timestamp

Adds timestamp for the uploaded version.

user

Adds the user who uploaded each file version.

userid

Add the user ID that uploaded each file version.

comment

Comment on the version.

parsedcomment

Parse the comment on the version.

canonicaltitle

Adds the canonical title of the file.

url

Gives URL to the file and the description page.

size

Adds the size of the file in bytes and the height, width and page count (if applicable).

dimensions

Alias for size.

sha1

Adds SHA-1 hash for the file.

mime

Adds MIME type of the file.

thumbmime

Adds MIME type of the image thumbnail (requires url and param iiurlwidth).

mediatype

Adds the media type of the file.

metadata

Lists Exif metadata for the version of the file.

commonmetadata

Lists file format generic metadata for the version of the file.

extmetadata

Lists formatted metadata combined from multiple sources. Results are HTML formatted.

archivename

Adds the filename of the archive version for non-latest versions.

bitdepth

Adds the bit depth of the version.

uploadwarning

Used by the Special:Upload page to get information about an existing file. Not intended for use outside MediaWiki core.

Wie viele Dateiversionen pro Datei zurückgegeben werden sollen.

Zeitstempel, von dem die Liste beginnen soll.

Zeitstempel, an dem die Liste enden soll.

If iiprop=url is set, a URL to an image scaled to this width will be returned. For performance reasons if this option is used, no more than 50 scaled images will be returned.

Ähnlich wie iiurlwidth.

Version of metadata to use. If latest is specified, use latest version. Defaults to 1 for backwards compatibility.

What language to fetch extmetadata in. This affects both which translation to fetch, if multiple are available, as well as how things like numbers and various values are formatted.

If translations for extmetadata property are available, fetch all of them.

If specified and non-empty, only these keys will be returned for iiprop=extmetadata.

A handler specific parameter string. For example, PDFs might use page15-100px. iiurlwidth must be used and be consistent with iiurlparam.

When more results are available, use this to continue.

Look only for files in the local repository.

How many files to return.

When more results are available, use this to continue.

Only list these files. Useful for checking whether a certain page has a certain file.

The direction in which to list.

Which additional properties to get:

protection

List the protection level of each page.

talkid

The page ID of the talk page for each non-talk page.

watched

List the watched status of each page.

watchers

The number of watchers, if allowed.

notificationtimestamp

The watchlist notification timestamp of each page.

subjectid

The page ID of the parent page for each talk page.

url

Gives a full URL, an edit URL, and the canonical URL for each page.

readable

Whether the user can read this page.

preload

Gives the text returned by EditFormPreloadText.

displaytitle

Gives the way the page title is actually displayed.

Überprüft, ob der aktuelle Benutzer gewisse Aktionen auf der Seite ausführen kann.

Use action=query&meta=tokens instead.

When more results are available, use this to continue.

Which additional properties to get for each interlanguage link:

url

Adds the full URL.

Only return interwiki links with this prefix.

Interwiki link to search for. Must be used with iwprefix.

The direction in which to list.

How many interwiki links to return.

When more results are available, use this to continue.

Whether to get the full URL (cannot be used with iwprop).

Which additional properties to get for each interlanguage link:

url

Adds the full URL.

langname

Adds the localised language name (best effort). Use llinlanguagecode to control the language.

autonym

Adds the native language name.

Only return language links with this language code.

Link to search for. Must be used with lllang.

The direction in which to list.

Language code for localised language names.

How many langlinks to return.

When more results are available, use this to continue.

Whether to get the full URL (cannot be used with llprop).

Show links in these namespaces only.

How many links to return.

When more results are available, use this to continue.

Only list links to these titles. Useful for checking whether a certain page links to a certain title.

The direction in which to list.

Which properties to get:

pageid

Page ID of each page.

title

Title of each page.

redirect

Flag if the page is a redirect.

Only include pages in these namespaces.

Show only items that meet these criteria:

redirect

Only show redirects.

!redirect

Only show non-redirects.

How many to return.

When more results are available, use this to continue.

When more results are available, use this to continue.

Only list these props. Useful for checking whether a certain page uses a certain page prop.

Which properties to get:

pageid

Page ID of each redirect.

title

Title of each redirect.

fragment

Fragment of each redirect, if any.

Only include pages in these namespaces.

Show only items that meet these criteria:

fragment

Only show redirects with a fragment.

!fragment

Only show redirects without a fragment.

How many redirects to return.

When more results are available, use this to continue.

Which properties to get for each revision:

ids

The ID of the revision.

flags

Revision flags (minor).

timestamp

The timestamp of the revision.

user

User that made the revision.

userid

User ID of the revision creator.

size

Length (bytes) of the revision.

sha1

SHA-1 (base 16) of the revision.

contentmodel

Content model ID of the revision.

comment

Comment by the user for the revision.

parsedcomment

Parsed comment by the user for the revision.

content

Text of the revision.

tags

Tags for the revision.

Limit how many revisions will be returned.

Expand templates in revision content (requires rvprop=content).

Generate XML parse tree for revision content (requires rvprop=content).

Parse revision content (requires rvprop=content). For performance reasons, if this option is used, rvlimit is enforced to 1.

Only retrieve the content of this section number.

Revision ID to diff each revision to. Use prev, next and cur for the previous, next and current revision respectively.

Text to diff each revision to. Only diffs a limited number of revisions. Overrides rvdiffto. If rvsection is set, only that section will be diffed against this text

Serialization format used for rvdifftotext and expected for output of content.

From which revision ID to start enumeration.

Stop revision enumeration on this revision ID.

From which revision timestamp to start enumeration.

Enumerate up to this timestamp.

In which direction to enumerate:

newer

List oldest first. Note: rvstart has to be before rvend.

older

List newest first (default). Note: rvstart has to be later than rvend.

Only include revisions made by user.

Exclude revisions made by user.

Only list revisions tagged with this tag.

Which tokens to obtain for each revision.

When more results are available, use this to continue.

Key that identifies a previous upload that was stashed temporarily.

Alias for siifilekey, for backward compatibility.

Which file information to get:

timestamp

Adds timestamp for the uploaded version.

canonicaltitle

Adds the canonical title of the file.

url

Gives URL to the file and the description page.

size

Adds the size of the file in bytes and the height, width and page count (if applicable).

dimensions

Alias for size.

sha1

Adds SHA-1 hash for the file.

mime

Adds MIME type of the file.

thumbmime

Adds MIME type of the image thumbnail (requires url and param siiurlwidth).

metadata

Lists Exif metadata for the version of the file.

commonmetadata

Lists file format generic metadata for the version of the file.

extmetadata

Lists formatted metadata combined from multiple sources. Results are HTML formatted.

bitdepth

Adds the bit depth of the version.

If siiprop=url is set, a URL to an image scaled to this width will be returned. For performance reasons if this option is used, no more than 50 scaled images will be returned.

Ähnlich wie siiurlwidth.

A handler specific parameter string. For example, PDFs might use page15-100px. siiurlwidth must be used and be consistent with siiurlparam.

Show templates in this namespaces only.

How many templates to return.

When more results are available, use this to continue.

Only list these templates. Useful for checking whether a certain page uses a certain template.

The direction in which to list.

Which properties to get:

pageid

Page ID of each page.

title

Title of each page.

redirect

Flag if the page is a redirect.

Only include pages in these namespaces.

Show only items that meet these criteria:

redirect

Only show redirects.

!redirect

Only show non-redirects.

How many to return.

When more results are available, use this to continue.

Kategorie, bei der die Auflistung beginnen soll.

When more results are available, use this to continue.

Kategorie, bei der die Auflistung enden soll.

Listet alle Kategorien auf, die mit dem angegebenen Wert beginnen.

Sortierrichtung.

Gibt nur Kategorien zurück, die mindestens die angegebene Anzahl an Einträgen haben.

Gibt nur Kategorien zurück, die höchstens die angegebene Anzahl an Einträgen haben.

Wie viele Kategorien zurückgegeben werden sollen.

Zurückzugebende Eigenschaften:

size

Ergänzt die Anzahl der Einträge in der Antwort.

hidden

Markiert über __HIDDENCAT__ versteckte Kategorien.

Which properties to get for each revision:

ids

The ID of the revision.

flags

Revision flags (minor).

timestamp

The timestamp of the revision.

user

User that made the revision.

userid

User ID of the revision creator.

size

Length (bytes) of the revision.

sha1

SHA-1 (base 16) of the revision.

contentmodel

Content model ID of the revision.

comment

Comment by the user for the revision.

parsedcomment

Parsed comment by the user for the revision.

content

Text of the revision.

tags

Tags for the revision.

Limit how many revisions will be returned.

Expand templates in revision content (requires adrprop=content).

Generate XML parse tree for revision content (requires adrprop=content).

Parse revision content (requires adrprop=content). For performance reasons, if this option is used, adrlimit is enforced to 1.

Only retrieve the content of this section number.

Revision ID to diff each revision to. Use prev, next and cur for the previous, next and current revision respectively.

Text to diff each revision to. Only diffs a limited number of revisions. Overrides adrdiffto. If adrsection is set, only that section will be diffed against this text

Serialization format used for adrdifftotext and expected for output of content.

Nur Versionen von diesem Benutzer auflisten.

Nur Seiten in diesem Namensraum auflisten.

Der Zeitstempel, bei dem die Auflistung beginnen soll.

Der Zeitstempel, bei dem die Auflistung enden soll.

In which direction to enumerate:

newer

List oldest first. Note: adrstart has to be before adrend.

older

List newest first (default). Note: adrstart has to be later than adrend.

Seitentitel, bei dem die Auflistung beginnen soll.

Seitentitel, bei dem die Auflistung enden soll.

Listet alle Seitentitel auf, die mit dem angegebenen Wert beginnen.

Schließt Bearbeitungen des angegebenen Benutzers aus.

Listet nur Versionen auf, die die angegebene Markierung haben.

When more results are available, use this to continue.

When being used as a generator, generate titles rather than revision IDs.

When more results are available, use this to continue.

The title of the file to start enumerating from.

The title of the file to stop enumerating at.

Search for all file titles that begin with this value.

Only show distinct file titles. Cannot be used with afprop=ids. When used as a generator, yields target pages instead of source pages.

Which pieces of information to include:

ids

Adds the page ID of the using page (cannot be used with afunique).

title

Adds the title of the file.

Wie viele Gesamtobjekte zurückgegeben werden sollen.

The direction in which to list.

Property to sort by.

The direction in which to list.

The image title to start enumerating from. Can only be used with aisort=name.

The image title to stop enumerating at. Can only be used with aisort=name.

When more results are available, use this to continue.

The timestamp to start enumerating from. Can only be used with aisort=timestamp.

The timestamp to end enumerating. Can only be used with aisort=timestamp.

Which file information to get:

timestamp

Adds timestamp for the uploaded version.

user

Adds the user who uploaded each file version.

userid

Add the user ID that uploaded each file version.

comment

Comment on the version.

parsedcomment

Parse the comment on the version.

canonicaltitle

Adds the canonical title of the file.

url

Gives URL to the file and the description page.

size

Adds the size of the file in bytes and the height, width and page count (if applicable).

dimensions

Alias for size.

sha1

Adds SHA-1 hash for the file.

mime

Adds MIME type of the file.

mediatype

Adds the media type of the file.

metadata

Lists Exif metadata for the version of the file.

commonmetadata

Lists file format generic metadata for the version of the file.

extmetadata

Lists formatted metadata combined from multiple sources. Results are HTML formatted.

bitdepth

Adds the bit depth of the version.

Search for all image titles that begin with this value. Can only be used with aisort=name.

Limit to images with at least this many bytes.

Limit to images with at most this many bytes.

SHA1-Hash des Bildes. Überschreibt aisha1base36.

SHA1-Hash des Bildes (Basis 36; verwendet in MediaWiki).

Only return files uploaded by this user. Can only be used with aisort=timestamp. Cannot be used together with aifilterbots.

How to filter files uploaded by bots. Can only be used with aisort=timestamp. Cannot be used together with aiuser.

What MIME types to search for, e.g. image/jpeg.

Wie viele Gesamtbilder zurückgegeben werden sollen.

When more results are available, use this to continue.

The title of the link to start enumerating from.

The title of the link to stop enumerating at.

Search for all linked titles that begin with this value.

Only show distinct linked titles. Cannot be used with alprop=ids. When used as a generator, yields target pages instead of source pages.

Which pieces of information to include:

ids

Adds the page ID of the linking page (cannot be used with alunique).

title

Adds the title of the link.

The namespace to enumerate.

How many total items to return.

The direction in which to list.

The page title to start enumerating from.

When more results are available, use this to continue.

The page title to stop enumerating at.

Search for all page titles that begin with this value.

The namespace to enumerate.

Welche Seiten aufgelistet werden sollen.

Limit to pages with at least this many bytes.

Limit to pages with at most this many bytes.

Limit to protected pages only.

Filter protections based on protection level (must be used with apprtype= parameter).

Filter protections based on cascadingness (ignored when apprtype isn't set).

How many total pages to return.

The direction in which to list.

Filter based on whether a page has langlinks. Note that this may not consider langlinks added by extensions.

Which protection expiry to filter the page on:

indefinite

Get only pages with indefinite protection expiry.

definite

Get only pages with a definite (specific) protection expiry.

all

Get pages with any protections expiry.

When more results are available, use this to continue.

The title of the redirect to start enumerating from.

The title of the redirect to stop enumerating at.

Search for all target pages that begin with this value.

Only show distinct target pages. Cannot be used with arprop=ids|fragment|interwiki. When used as a generator, yields target pages instead of source pages.

Which pieces of information to include:

ids

Adds the page ID of the redirecting page (cannot be used with arunique).

title

Adds the title of the redirect.

fragment

Adds the fragment from the redirect, if any (cannot be used with arunique).

interwiki

Adds the interwiki prefix from the redirect, if any (cannot be used with arunique).

The namespace to enumerate.

How many total items to return.

The direction in which to list.

When more results are available, use this to continue.

The title of the transclusion to start enumerating from.

The title of the transclusion to stop enumerating at.

Search for all transcluded titles that begin with this value.

Only show distinct transcluded titles. Cannot be used with atprop=ids. When used as a generator, yields target pages instead of source pages.

Which pieces of information to include:

ids

Adds the page ID of the transcluding page (cannot be used with atunique).

title

Adds the title of the transclusion.

Der aufzulistende Namensraum.

How many total items to return.

The direction in which to list.

The user name to start enumerating from.

The user name to stop enumerating at.

Search for all users that begin with this value.

Direction to sort in.

Only include users in the given groups.

Exclude users in the given groups.

Only include users with the given rights. Does not include rights granted by implicit or auto-promoted groups like *, user, or autoconfirmed.

Which pieces of information to include:

blockinfo

Adds the information about a current block on the user.

groups

Lists groups that the user is in. This uses more server resources and may return fewer results than the limit.

implicitgroups

Lists all the groups the user is automatically in.

rights

Lists rights that the user has.

editcount

Adds the edit count of the user.

registration

Adds the timestamp of when the user registered if available (may be blank).

Wie viele Benutzernamen insgesamt zurückgegeben werden sollen.

Only list users who have made edits.

Only list users active in the last 30 days.

Title to search. Cannot be used together with blpageid.

Page ID to search. Cannot be used together with bltitle.

When more results are available, use this to continue.

The namespace to enumerate.

The direction in which to list.

How to filter for redirects. If set to nonredirects when blredirect is enabled, this is only applied to the second level.

How many total pages to return. If blredirect is enabled, limit applies to each level separately (which means up to 2 * bllimit results may be returned).

If linking page is a redirect, find all pages that link to that redirect as well. Maximum limit is halved.

The timestamp to start enumerating from.

The timestamp to stop enumerating at.

In which direction to enumerate:

newer

List oldest first. Note: bkstart has to be before bkend.

older

List newest first (default). Note: bkstart has to be later than bkend.

List of block IDs to list (optional).

List of users to search for (optional).

Get all blocks applying to this IP or CIDR range, including range blocks. Cannot be used together with bkusers. CIDR ranges broader than IPv4/16 or IPv6/19 are not accepted.

The maximum number of blocks to list.

Which properties to get:

id

Adds the ID of the block.

user

Adds the username of the blocked user.

userid

Adds the user ID of the blocked user.

by

Adds the username of the blocking user.

byid

Adds the user ID of the blocking user.

timestamp

Adds the timestamp of when the block was given.

expiry

Adds the timestamp of when the block expires.

reason

Adds the reason given for the block.

range

Adds the range of IP addresses affected by the block.

flags

Tags the ban with (autoblock, anononly, etc.).

Show only items that meet these criteria. For example, to see only indefinite blocks on IP addresses, set bkshow=ip|!temp.

When more results are available, use this to continue.

Which category to enumerate (required). Must include the Kategorie: prefix. Cannot be used together with cmpageid.

Page ID of the category to enumerate. Cannot be used together with cmtitle.

Which pieces of information to include:

ids

Adds the page ID.

title

Adds the title and namespace ID of the page.

sortkey

Adds the sortkey used for sorting in the category (hexadecimal string).

sortkeyprefix

Adds the sortkey prefix used for sorting in the category (human-readable part of the sortkey).

type

Adds the type that the page has been categorised as (page, subcat or file).

timestamp

Adds the timestamp of when the page was included.

Only include pages in these namespaces. Note that cmtype=subcat or cmtype=file may be used instead of cmnamespace=14 or 6.

Which type of category members to include. Ignored when cmsort=timestamp is set.

When more results are available, use this to continue.

The maximum number of pages to return.

Property to sort by.

In which direction to sort.

Timestamp to start listing from. Can only be used with cmsort=timestamp.

Timestamp to end listing at. Can only be used with cmsort=timestamp.

Sortkey to start listing from, as returned by cmprop=sortkey. Can only be used with cmsort=sortkey.

Sortkey to end listing from, as returned by cmprop=sortkey. Can only be used with cmsort=sortkey.

Sortkey prefix to start listing from. Can only be used with cmsort=sortkey. Overrides cmstarthexsortkey.

Sortkey prefix to end listing BEFORE (not at, if this value occurs it will not be included!). Can only be used with cmsort=sortkey. Overrides cmendhexsortkey.

Stattdessen cmstarthexsortkey verwenden.

Stattdessen cmendhexsortkey verwenden.

The timestamp to start enumerating from.

The timestamp to stop enumerating at.

In which direction to enumerate:

newer

List oldest first. Note: drstart has to be before drend.

older

List newest first (default). Note: drstart has to be later than drend.

Auflistung bei diesem Titel beginnen.

Auflistung bei diesem Titel beenden.

Search for all page titles that begin with this value.

List only one revision for each page.

Only list pages in this namespace.

Only list revisions tagged with this tag.

Only list revisions by this user.

Don't list revisions by this user.

Which properties to get:

revid

Adds the revision ID of the deleted revision.

parentid

Adds the revision ID of the previous revision to the page.

user

Adds the user who made the revision.

userid

Adds the user ID whom made the revision.

comment

Adds the comment of the revision.

parsedcomment

Adds the parsed comment of the revision.

minor

Tags if the revision is minor.

len

Adds the length (bytes) of the revision.

sha1

Adds the SHA-1 (base 16) of the revision.

content

Adds the content of the revision.

token

Deprecated. Gives the edit token.

tags

Tags for the revision.

The maximum amount of revisions to list.

When more results are available, use this to continue.

Title to search. Cannot be used together with eipageid.

Page ID to search. Cannot be used together with eititle.

When more results are available, use this to continue.

Der aufzulistende Namensraum.

The direction in which to list.

Wie Weiterleitungen behandelt werden sollen.

Wie viele Seiten insgesamt zurückgegeben werden sollen.

Which pieces of information to include:

ids

Adds the ID of page.

title

Adds the title and namespace ID of the page.

url

Adds the URL used in the page.

When more results are available, use this to continue.

Protocol of the URL. If empty and euquery set, the protocol is http. Leave both this and euquery empty to list all external links.

Search string without protocol. See Special:LinkSearch. Leave empty to list all external links.

The page namespaces to enumerate.

Wie viele Seiten zurückgegeben werden sollen.

Expand protocol-relative URLs with the canonical protocol.

Der Bildertitel, bei dem die Auflistung beginnen soll.

Der Bildertitel, bei dem die Auflistung enden soll.

Search for all image titles that begin with this value.

The direction in which to list.

SHA1 hash of image. Overrides fasha1base36.

SHA1 hash of image in base 36 (used in MediaWiki).

Which image information to get:

sha1

Adds SHA-1 hash for the image.

timestamp

Adds timestamp for the uploaded version.

user

Adds user who uploaded the image version.

size

Adds the size of the image in bytes and the height, width and page count (if applicable).

dimensions

Alias for size.

description

Adds description the image version.

parseddescription

Parse the description on the version.

mime

Adds MIME of the image.

mediatype

Adds the media type of the image.

metadata

Lists Exif metadata for the version of the image.

bitdepth

Adds the bit depth of the version.

archivename

Adds the filename of the archive version for non-latest versions.

Wie viele Bilder insgesamt zurückgegeben werden sollen.

When more results are available, use this to continue.

Title to search. Cannot be used together with iupageid.

Page ID to search. Cannot be used together with iutitle.

When more results are available, use this to continue.

The namespace to enumerate.

The direction in which to list.

How to filter for redirects. If set to nonredirects when iuredirect is enabled, this is only applied to the second level.

How many total pages to return. If iuredirect is enabled, the limit applies to each level separately (which means up to 2 * iulimit results may be returned).

If linking page is a redirect, find all pages that link to that redirect as well. Maximum limit is halved.

Präfix für das Interwiki.

Interwiki link to search for. Must be used with iwblblprefix.

When more results are available, use this to continue.

How many total pages to return.

Which properties to get:

iwprefix

Adds the prefix of the interwiki.

iwtitle

Adds the title of the interwiki.

The direction in which to list.

Language for the language link.

Language link to search for. Must be used with lbllang.

When more results are available, use this to continue.

Wie viele Gesamtseiten zurückgegeben werden sollen.

Which properties to get:

lllang

Adds the language code of the language link.

lltitle

Adds the title of the language link.

The direction in which to list.

Which properties to get:

ids

Adds the ID of the log event.

title

Adds the title of the page for the log event.

type

Adds the type of log event.

user

Adds the user responsible for the log event.

userid

Adds the user ID who was responsible for the log event.

timestamp

Adds the timestamp for the event.

comment

Adds the comment of the event.

parsedcomment

Adds the parsed comment of the event.

details

Lists additional details about the event.

tags

Lists tags for the event.

Filter log entries to only this type.

Filter log actions to only this action. Overrides letype. Wildcard actions like action/* allows to specify any string for the asterisk.

The timestamp to start enumerating from.

The timestamp to end enumerating.

In which direction to enumerate:

newer

List oldest first. Note: lestart has to be before leend.

older

List newest first (default). Note: lestart has to be later than leend.

Filter entries to those made by the given user.

Filter entries to those related to a page.

Filter entries to those in the given namespace.

Filter entries that start with this prefix.

Only list event entries tagged with this tag.

How many total event entries to return.

When more results are available, use this to continue.

When more results are available, use this to continue.

The maximum number of names to return.

Page prop for which to enumerate pages.

Which pieces of information to include:

ids

Adds the page ID.

title

Adds the title and namespace ID of the page.

value

Adds the value of the page prop.

When more results are available, use this to continue.

The maximum number of pages to return.

In which direction to sort.

Such-Zeichenfolge.

Namespaces to search.

Maximum number of results to return.

Number of results to skip.

Only list titles in these namespaces.

Only list titles with these protection levels.

How many total pages to return.

In which direction to enumerate:

newer

List oldest first. Note: ptstart has to be before ptend.

older

List newest first (default). Note: ptstart has to be later than ptend.

Start listing at this protection timestamp.

Stop listing at this protection timestamp.

Which properties to get:

timestamp

Adds the timestamp of when protection was added.

user

Adds the user that added the protection.

userid

Adds the user ID that added the protection.

comment

Adds the comment for the protection.

parsedcomment

Adds the parsed comment for the protection.

expiry

Adds the timestamp of when the protection will be lifted.

level

Adds the protection level.

When more results are available, use this to continue.

The name of the special page. Note, this is case sensitive.

When more results are available, use this to continue.

Number of results to return.

Return pages in these namespaces only.

Limit how many random pages will be returned.

Load a random redirect instead of a random page.

The timestamp to start enumerating from.

The timestamp to end enumerating.

In which direction to enumerate:

newer

List oldest first. Note: rcstart has to be before rcend.

older

List newest first (default). Note: rcstart has to be later than rcend.

Filter changes to only these namespaces.

Only list changes by this user.

Don't list changes by this user.

Only list changes tagged with this tag.

Include additional pieces of information:

user

Adds the user responsible for the edit and tags if they are an IP.

userid

Adds the user ID responsible for the edit.

comment

Adds the comment for the edit.

parsedcomment

Adds the parsed comment for the edit.

flags

Adds flags for the edit.

timestamp

Adds timestamp of the edit.

title

Adds the page title of the edit.

ids

Adds the page ID, recent changes ID and the new and old revision ID.

sizes

Adds the new and old page length in bytes.

redirect

Tags edit if page is a redirect.

patrolled

Tags patrollable edits as being patrolled or unpatrolled.

loginfo

Adds log information (log ID, log type, etc) to log entries.

tags

Lists tags for the entry.

sha1

Adds the content checksum for entries associated with a revision.

Use action=query&meta=tokens instead.

Show only items that meet these criteria. For example, to see only minor edits done by logged-in users, set rcshow=minor|!anon.

How many total changes to return.

Which types of changes to show.

Only list changes which are the latest revision.

When more results are available, use this to continue.

Search for all page titles (or content) that have this value.

Search only within these namespaces.

Which type of search to perform.

Which metadata to return.

Which properties to return:

size

Adds the size of the page in bytes.

wordcount

Adds the word count of the page.

timestamp

Adds the timestamp of when the page was last edited.

snippet

Adds a parsed snippet of the page.

titlesnippet

Adds a parsed snippet of the page title.

redirectsnippet

Adds a parsed snippet of the redirect title.

redirecttitle

Adds the title of the matching redirect.

sectionsnippet

Adds a parsed snippet of the matching section title.

sectiontitle

Adds the title of the matching section.

score

Deprecated and ignored.

hasrelated

Deprecated and ignored.

When more results are available, use this to continue.

How many total pages to return.

Include interwiki results in the search, if available.

When more results are available, use this to continue.

The maximum number of tags to list.

Which properties to get:

name

Adds name of tag.

displayname

Adds system message for the tag.

description

Adds description of the tag.

hitcount

Adds the number of revisions and log entries that have this tag.

defined

Indicate whether the tag is defined.

source

Gets the sources of the tag, which may include extension for extension-defined tags and manual for tags that may be applied manually by users.

active

Whether the tag is still being applied.

The maximum number of contributions to return.

The start timestamp to return from.

The end timestamp to return to.

When more results are available, use this to continue.

The users to retrieve contributions for.

Retrieve contributions for all users whose names begin with this value. Overrides ucuser.

In which direction to enumerate:

newer

List oldest first. Note: ucstart has to be before ucend.

older

List newest first (default). Note: ucstart has to be later than ucend.

Only list contributions in these namespaces.

Include additional pieces of information:

ids

Adds the page ID and revision ID.

title

Adds the title and namespace ID of the page.

timestamp

Adds the timestamp of the edit.

comment

Adds the comment of the edit.

parsedcomment

Adds the parsed comment of the edit.

size

Adds the new size of the edit.

sizediff

Adds the size delta of the edit against its parent.

flags

Adds flags of the edit.

patrolled

Tags patrolled edits.

tags

Lists tags for the edit.

Show only items that meet these criteria, e.g. non minor edits only: ucshow=!minor.

If ucshow=patrolled or ucshow=!patrolled is set, revisions older than $wgRCMaxAge (7776000 seconds) won't be shown.

Only list revisions tagged with this tag.

Only list changes which are the latest revision.

Which pieces of information to include:

blockinfo

Tags if the user is blocked, by whom, and for what reason.

groups

Lists all the groups each user belongs to.

implicitgroups

Lists all the groups a user is automatically a member of.

rights

Lists all the rights each user has.

editcount

Adds the user's edit count.

registration

Adds the user's registration timestamp.

emailable

Tags if the user can and wants to receive email through Special:Emailuser.

gender

Tags the gender of the user. Returns "male", "female", or "unknown".

A list of users to obtain information for.

Use action=query&meta=tokens instead.

Include multiple revisions of the same page within given timeframe.

The timestamp to start enumerating from.

The timestamp to end enumerating.

Filter changes to only the given namespaces.

Only list changes by this user.

Don't list changes by this user.

In which direction to enumerate:

newer

List oldest first. Note: wlstart has to be before wlend.

older

List newest first (default). Note: wlstart has to be later than wlend.

How many total results to return per request.

Which additional items to get:

ids

Adds revision IDs and page IDs.

title

Adds title of the page.

flags

Adds flags for the edit.

user

Adds the user who made the edit.

userid

Adds user ID of whom made the edit.

comment

Adds comment of the edit.

parsedcomment

Adds parsed comment of the edit.

timestamp

Adds timestamp of the edit.

patrol

Tags edits that are patrolled.

sizes

Adds the old and new lengths of the page.

notificationtimestamp

Adds timestamp of when the user was last notified about the edit.

loginfo

Adds log information where appropriate.

Show only items that meet these criteria. For example, to see only minor edits done by logged-in users, set wlshow=minor|!anon.

Which types of changes to show:

edit

Regular page edits.

external

External changes.

new

Page creations.

log

Log entries.

Used along with wltoken to access a different user's watchlist.

A security token (available in the user's preferences) to allow access to another user's watchlist.

When more results are available, use this to continue.

When more results are available, use this to continue.

Only list pages in the given namespaces.

How many total results to return per request.

Which additional properties to get:

changed

Adds timestamp of when the user was last notified about the edit.

Only list items that meet these criteria.

Used along with wrtoken to access a different user's watchlist.

A security token (available in the user's preferences) to allow access to another user's watchlist.

In which direction to enumerate:

newer

List oldest first. Note: wrstart has to be before wrend.

older

List newest first (default). Note: wrstart has to be later than wrend.

Which messages to output. * (default) means all messages.

Which properties to get.

Set to enable parser, will preprocess the wikitext of message (substitute magic words, handle templates, etc.).

If set, do not include the content of the messages in the output.

Also include local messages, i.e. messages that don't exist in the software but do exist as a MediaWiki: page. This lists all MediaWiki: pages, so it will also list those that aren't really messages such as Common.js.

Arguments to be substituted into message.

Return only messages with names that contain this string.

Return only messages in this customisation state.

Return messages in this language.

Return messages starting at this message.

Return messages ending at this message.

Page name to use as context when parsing message (for amenableparser option).

Return messages with this prefix.

Which repository properties to get (there may be more available on some wikis):

apiurl

URL to the repository API - helpful for getting image info from the host.

name

The key of the repository - used in e.g. $wgForeignFileRepos and imageinfo return values.

displayname

The human-readable name of the repository wiki.

rooturl

Root URL for image paths.

local

Whether that repository is the local one or not.

Which information to get:

general

Overall system information.

namespaces

List of registered namespaces and their canonical names.

namespacealiases

List of registered namespace aliases.

specialpagealiases

List of special page aliases.

magicwords

List of magic words and their aliases.

statistics

Returns site statistics.

interwikimap

Returns interwiki map (optionally filtered, optionally localised by using siinlanguagecode).

dbrepllag

Returns database server with the highest replication lag.

usergroups

Returns user groups and the associated permissions.

libraries

Returns libraries installed on the wiki.

extensions

Returns extensions installed on the wiki.

fileextensions

Returns list of file extensions allowed to be uploaded.

rightsinfo

Returns wiki rights (license) information if available.

restrictions

Returns information on available restriction (protection) types.

languages

Returns a list of languages MediaWiki supports (optionally localised by using siinlanguagecode).

skins

Returns a list of all enabled skins (optionally localised by using siinlanguagecode, otherwise in the content language).

extensiontags

Returns a list of parser extension tags.

functionhooks

Returns a list of parser function hooks.

showhooks

Returns a list of all subscribed hooks (contents of $wgHooks).

variables

Returns a list of variable IDs.

protocols

Returns a list of protocols that are allowed in external links.

defaultoptions

Returns the default values for user preferences.

Return only local or only nonlocal entries of the interwiki map.

List all database servers, not just the one lagging the most.

Lists the number of users in user groups.

Language code for localised language names (best effort) and skin names.

Types of token to request.

Which pieces of information to include:

blockinfo

Tags if the current user is blocked, by whom, and for what reason.

hasmsg

Adds a tag message if the current user has pending messages.

groups

Lists all the groups the current user belongs to.

implicitgroups

Lists all the groups the current user is automatically a member of.

rights

Lists all the rights the current user has.

changeablegroups

Lists the groups the current user can add to and remove from.

options

Lists all preferences the current user has set.

preferencestoken

Deprecated. Get a token to change current user's preferences.

editcount

Adds the current user's edit count.

ratelimits

Lists all rate limits applying to the current user.

realname

Adds the user's real name.

email

Adds the user's email address and email authentication date.

acceptlang

Echoes the Accept-Language header sent by the client in a structured format.

registrationdate

Adds the user's registration date.

unreadcount

Adds the count of unread pages on the user's watchlist (maximum 999; returns 1000+ if more).

Type of revision deletion being performed.

Page title for the revision deletion, if required for the type.

Identifiers for the revisions to be deleted.

What to hide for each revision.

What to unhide for each revision.

Whether to suppress data from administrators as well as others.

Reason for the deletion or undeletion.

Ein „csrf“-Token abgerufen von action=query&meta=tokens

Title of the page to roll back. Cannot be used together with pageid.

Page ID of the page to roll back. Cannot be used together with title.

Name of the user whose edits are to be rolled back.

Custom edit summary. If empty, default summary will be used.

Mark the reverted edits and the revert as bot edits.

Unconditionally add or remove the page from the current user's watchlist, use preferences or do not change watch.

Ein „rollback“-Token abgerufen von action=query&meta=tokens

For compatibility, the token used in the web UI is also accepted.

An allen beobachteten Seiten arbeiten.

Timestamp to which to set the notification timestamp.

Revision to set the notification timestamp to (one page only).

Revision to set the notification timestamp newer than (one page only).

When more results are available, use this to continue.

Eine Liste der Titel, an denen gearbeitet werden soll.

Eine Liste der Seitenkennungen, an denen gearbeitet werden soll.

Eine Liste der Versionskennungen, an denen gearbeitet werden soll.

Get the list of pages to work on by executing the specified query module.

Note: Generator parameter names must be prefixed with a "g", see examples.

Automatically resolve redirects in titles, pageids, and revids, and in pages returned by generator.

Convert titles to other variants if necessary. Only works if the wiki's content language supports variant conversion. Languages that support variant conversion include gan, iu, kk, ku, shi, sr, tg, uz, zh.

Ein „csrf“-Token abgerufen von action=query&meta=tokens

URLs to validate against the blacklist.

Ein „csrf“-Token abgerufen von action=query&meta=tokens

One or more recent changes IDs from which to add or remove the tag.

One or more revision IDs from which to add or remove the tag.

One or more log entry IDs from which to add or remove the tag.

Tags to add. Only manually defined tags can be added.

Tags to remove. Only tags that are either manually defined or completely undefined can be removed.

Reason for the change.

Ein „csrf“-Token abgerufen von action=query&meta=tokens

Types of token to request.

ID of the block to unblock (obtained through list=blocks). Cannot be used together with user.

Username, IP address or IP range to unblock. Cannot be used together with id.

Grund für die Freigabe.

Ein „csrf“-Token abgerufen von action=query&meta=tokens

Title of the page to restore.

Grund für die Wiederherstellung.

Timestamps of the revisions to restore. If both timestamps and fileids are empty, all will be restored.

IDs of the file revisions to restore. If both timestamps and fileids are empty, all will be restored.

Unconditionally add or remove the page from the current user's watchlist, use preferences or do not change watch.

Ein „csrf“-Token abgerufen von action=query&meta=tokens

Ziel-Dateiname.

Upload comment. Also used as the initial page text for new files if text is not specified.

Initial page text for new files.

Die Seite beobachten.

Unconditionally add or remove the page from the current user's watchlist, use preferences or do not change watch.

Ignore any warnings.

Dateiinhalte.

URL, von der die Datei abgerufen werden soll.

Key that identifies a previous upload that was stashed temporarily.

Same as filekey, maintained for backward compatibility.

If set, the server will stash the file temporarily instead of adding it to the repository.

Filesize of entire upload.

Offset of chunk in bytes.

Chunk contents.

Make potentially large file operations asynchronous when possible.

Make fetching a URL asynchronous.

If asyncdownload is used, leave a message on the user talk page if finished.

Fetch the upload status for this file key (upload by URL).

Only fetch the upload status for the given file key.

Ein „csrf“-Token abgerufen von action=query&meta=tokens

Benutzername.

Benutzerkennung.

Add the user to these groups.

Remove the user from these groups.

Reason for the change.

Ein „userrights“-Token abgerufen von action=query&meta=tokens

For compatibility, the token used in the web UI is also accepted.

The page to (un)watch. Use titles instead.

If set the page will be unwatched rather than watched.

When more results are available, use this to continue.

Eine Liste der Titel, an denen gearbeitet werden soll.

Eine Liste der Seitenkennungen, an denen gearbeitet werden soll.

Eine Liste der Versionskennungen, an denen gearbeitet werden soll.

Get the list of pages to work on by executing the specified query module.

Note: Generator parameter names must be prefixed with a "g", see examples.

Automatically resolve redirects in titles, pageids, and revids, and in pages returned by generator.

Convert titles to other variants if necessary. Only works if the wiki's content language supports variant conversion. Languages that support variant conversion include gan, iu, kk, ku, shi, sr, tg, uz, zh.

Ein „watch“-Token abgerufen von action=query&meta=tokens

Falls angegeben, wird die Ausgabe in einen angegebenen Funktionsaufruf eingeschlossen. Aus Sicherheitsgründen sind benutzerspezifische Daten beschränkt.

Falls angegeben, kodiert die meisten (aber nicht alle) Nicht-ASCII-Zeichen als UTF-8 anstatt sie mit hexadezimalen Escape-Sequenzen zu ersetzen.

If specified, encodes all non-ASCII using hexadecimal escape sequences. Default when formatversion is 1.

Output formatting:

1

Backwards-compatible format (XML-style booleans, * keys for content nodes, etc.).

2

Experimental modern format. Details may change!

latest

Use the latest format (currently 2), may change without warning.

Falls angegeben, wird die Ausgabe in einen angegebenen Funktionsaufruf eingeschlossen. Aus Sicherheitsgründen sind benutzerspezifische Daten beschränkt.

Falls angegeben, kodiert die meisten (aber nicht alle) Nicht-ASCII-Zeichen als UTF-8 anstatt sie mit hexadezimalen Escape-Sequenzen zu ersetzen.

If specified, encodes all non-ASCII using hexadecimal escape sequences. Default when formatversion is 1.

Output formatting:

1

Backwards-compatible format (XML-style booleans, * keys for content nodes, etc.).

2

Experimental modern format. Details may change!

latest

Use the latest format (currently 2), may change without warning.

Output formatting:

1

Backwards-compatible format (XML-style booleans, * keys for content nodes, etc.).

2

Experimental modern format. Details may change!

latest

Use the latest format (currently 2), may change without warning.

Output formatting:

1

Backwards-compatible format (XML-style booleans, * keys for content nodes, etc.).

2

Experimental modern format. Details may change!

latest

Use the latest format (currently 2), may change without warning.

Falls angegeben, fügt die benannte Seite als XSL-Stylesheet hinzu. Der Wert muss ein Titel im Namensraum „MediaWiki“ sein und mit .xsl enden.

Falls angegeben, ergänzt einen XML-Namensraum.

Falls angegeben, fügt die benannte Seite als XSL-Stylesheet hinzu. Der Wert muss ein Titel im Namensraum „MediaWiki“ sein und mit .xsl enden.

Falls angegeben, ergänzt einen XML-Namensraum.

Falls angegeben, wird die Ausgabe in einen angegebenen Funktionsaufruf eingeschlossen. Aus Sicherheitsgründen sind benutzerspezifische Daten beschränkt.

Falls angegeben, kodiert die meisten (aber nicht alle) Nicht-ASCII-Zeichen als UTF-8 anstatt sie mit hexadezimalen Escape-Sequenzen zu ersetzen.

If specified, encodes all non-ASCII using hexadecimal escape sequences. Default when formatversion is 1.

Output formatting:

1

Backwards-compatible format (XML-style booleans, * keys for content nodes, etc.).

2

Experimental modern format. Details may change!

latest

Use the latest format (currently 2), may change without warning.